 |
 |
 |
 |
 |
Combined Winding Machine for Wire and Foil
This winding machine was developed to wind both round wire and foil. It has three rolls for insulation material, one flattener wire and automatic lung that controls the speed and the wire with tension.
| Control | Microcontrolled CNC with 2 degrees of freedom (spindle and traverse) |
| Memory | Allows to store up to 5000 windings |
| Programming | Easy programming "Teach-in" mode (operator activates commands manually) While winding you can change the winding direction, coil winding direction, winding pitch and others commands |
| Interfaces | PC Computer Programming on Windows environment LCD monitor on the cabinet |
| Spindle | AC Motor with frequency inverter Speed from 20 to 600 rpm Torque 35 kgf Acceleration and deceleration ramps control It bears a load of 250 Kg without tailstock |
| Wire guide | Pitch electronic control Stepper motor with speed adjustment Motor de passo com ajuste de velocidade Linear guides and ball bearing screw Maximum traverse of 300 mm Pitch resolution: maximum 10 mm per turn |
| Tensioner | Tensioner with boken wire sensor Tension mechanically adjustable |
| Coil | Max diameter 600 mm Max width 300 mm |
| Characteristics | Weight: 2500 Kg. Dimensions:1900 (width) x 1400 (height) x 3500 mm (depth) |
| Foil Dereeler 01 spindle | Hydraulic brake (manually adjustable by pneumatic pressure) Expandable mandrel (mechanical or pneumatic) Anti-reverse turn mechanism for foil dereeler Raw material - Max outer diameter 700 mm and max width 225 mm Inner diameter 330 mm |
| Insulation Dereeler 03 spindles | Hydraulic brake (manually adjustable by pneumatic pressure) Expandable mandrel (mechanical or pneumatic) Raw material - Max outer diameter 370 mm and max width 300 mm Inner diameter 76 mm |
- Tensioner for smaller wires, wire flattener, higher torque device, etc...
